Galvanic

Automatic phosphating and passivation single-row line for the treatment of steel parts in baskets.

Dimensions of the tank equipment: 3600 x 1650 x 2200 mm. Automatic transport with three handlers with a load capacity of 2000 kg. The line is installed in a tunnel with suction. Line cycle: 8 min.

Automatic double-row galvanic line for decorative plating of parts mounted on hinges or drums

Dimensions of the tank equipment: 1500 x 600 x 1000. Finish coatings: shiny nickel, satin nickel, decorative chrome, black chrome.

Automatic double line for the application of galvanic zinc and cadmium on steel hinges.

Dimensions of the tank equipment: 2000 x 600 x 1700 mm Automatic control of all parameters, special programs for plating large shafts, including their automatic feed to the line, special handlers with suction, hot water spraying and blowing.

Automatic line for the application of galvanic zinc on steel parts on hinges.

Dimensions of the tank equipment: 1400 x 600 x 1400 mm. Automatic control of all the parameters of the formula. Process visualization, protocol printing for each item with treated product.

Automatic single-row line for galvanic copper plating on steel parts of hinges as a protective coating prior to chemical-heat treatment.

Dimensions of the tank equipment: 1600 x 600 x 1700 mm. Automatic control of all parameters: bath temperatures, levels, rinsing quality, voltage and currents of electrochemical processes.

Automatic single-row line for galvanic copper plating on steel hinges.

Dimensions of the tank equipment: 1600 x 600 x 1700 mm. Automatic control of all the parameters of the process.

Semi-automatic single-row line for the application and removal of wax insulating coatings, line for the removal of low quality coatings.

Dimensions of the tank equipment: 2000 x 800 x 1700 mm + 1000 x 800 x 1700 mm. Automatic control of all the parameters of the process.

Automatic two-row line for titanium casting on hinges and drums.

Dimensions of the tank equipment: 2000 x 800 x 1900 mm. Automatic control of all required parameters, special programs for titanium casting in special products with rotating parts in the casting tank.

Two automatic two-row lines for applying zinc, zinc-nickel and nickel to steel parts in drums and on hangers

Lines for plating with zinc coating, zinc-nickel alloy and nickel itself, working in fully automatic mode with an emphasis on the least possible interaction of the operator in the production process. The lines are placed in a small space, while maintaining full functionality and serviceability.

Automatic chemical nickel plating line

The automatic line for chemical nickel plating is designed for chemical plating with a nickel coating. The chemical nickel plating process produces very hard, abrasion-resistant, low-phosphorus, lead- and cadmium-free coatings.